Bottled water pH levels mostly sit between 6 and 8, close to neutral, and alkaline brands such as Essentia run higher, near 9.5 to 10. We built the chart below from each brand’s own water quality report where one exists, because several pH charts that rank for this search are dentist handouts with no date or test method. Two of the biggest brands, Dasani and Smartwater, do not list pH in their current annual analyses at all.
Below is the chart, what the numbers mean, why the same brand can test differently, and whether pH matters for your health.
What are bottled water pH levels by brand?
Here is what each brand reports, next to an independent test from June 2020 by Dr. Jamie Koufman, a physician who publishes her own readings. Brand figures come from the reports named in the Sources section, checked November 15, 2026.
| Brand | Type | pH in the brand’s own report | Koufman test, June 2020 |
|---|---|---|---|
| Essentia | Ionized alkaline purified | 9.8 (2021 report; brand claims “9.5 or higher”) | 9.5 |
| Evian | Natural spring | 7.95 (NSF lab test, February 2025) | 7.3 |
| Fiji | Artesian | 7.7 on Fiji’s website; 7.8 in a 2018 report | 7.2 |
| Core | Purified, minerals added | 7.4 (specification 7.2 to 7.6) | 7.4 |
| Poland Spring | Spring | 6.2 to 7.5 across its sources (2025 report) | 6.5 |
| Poland Spring Sparkling | Sparkling | 4.4 (2025 report) | not tested |
| Nestlé Pure Life | Purified | not checked | 7.0 |
| Aquafina | Purified | report blocked automated access when we checked | 5.9 |
| Dasani | Purified | not listed in its 2024 annual analysis | not tested |
| Smartwater | Vapor distilled | not listed in its 2025 annual analysis | not tested |
Crystal Geyser is a special case because it bottles at seven different springs, and its pH changes with the source on the label. Our Crystal Geyser review lists each spring’s report.
What pH should drinking water be?
Between 6.5 and 8.5. That is the EPA’s secondary drinking water standard for pH, and Fiji’s report lists the same 6.5 to 8.5 range next to its result. The EPA says secondary standards are “not federally enforceable.” They cover taste, appearance and plumbing effects, not health.
The EPA lists the effects outside that range: low pH gives a “bitter metallic taste” and corrosion, while high pH gives a “slippery feel,” a “soda taste” and deposits. So a bottled water at 6.2 or 9.8 is outside the guidance, but that is a taste and plumbing guideline, not a safety limit.

Why does the same brand show different pH readings?
Our table shows it plainly: Evian reports 7.95 but tested 7.3 in Koufman’s reading, and Fiji reports 7.7 but tested 7.2. Several things cause gaps like these:
- Different years and batches. Spring and artesian water can vary over time and between plants.
- Different sources. Poland Spring draws from several springs, which is why its report gives a range of 6.2 to 7.5 rather than one number.
- Low-mineral water drifts. Purified waters such as Aquafina have very few dissolved minerals to hold the pH steady, so the reading moves easily, for example as the water picks up carbon dioxide from the air once opened.
- Method and equipment. A calibrated lab meter and a home pen or strip will not always agree, and Koufman’s page does not describe her method.
That is why we put the brand’s lab figure first and show the independent test beside it, rather than mixing numbers from different sources into one ranking.
Which bottled water has the highest pH?
Of the brands we checked, Essentia: its 2021 report shows 9.8, and it markets “9.5 or higher.” Essentia uses an ionization process to raise the pH. Our Essentia review covers what that does and does not do. Among naturally sourced waters, Evian’s 7.95 and Fiji’s 7.7 are on the alkaline side of neutral.
Which bottled water is acidic?
Sparkling water is the clearest example. Poland Spring’s own report puts its sparkling water at 4.4, because carbon dioxide dissolved in water forms carbonic acid. Among still waters, purified brands with few minerals can read slightly acidic; Aquafina tested 5.9 in Koufman’s 2020 reading. Dasani and Smartwater do not publish a pH, though Smartwater’s report says it adds magnesium sulfate and potassium chloride for taste after reverse osmosis.
Does the pH of bottled water matter for your health?
For most people, not much. Bottled water in the U.S. is regulated by the FDA as a food, and the pH guidance that exists is about taste and pipes, not safety. Claims that alkaline water improves health are covered in our review of whether alkaline water is worth it; in short, we found the evidence weak.
Where pH does matter is taste and teeth. The EPA says low-pH water can taste bitter or metallic, and in our view higher-mineral waters such as Evian taste fuller. If you sip acidic sparkling water all day and worry about your enamel, drinking it with meals and finishing with plain water is a sensible habit. For a wider look at what is in each brand beyond pH, see our guide to the safest bottled water brands and our reviews of Dasani and Aquafina.
How can you test bottled water pH at home?
Use a pocket pH meter, calibrated just before you test. Pour the water into a clean glass, let it reach room temperature, and read it within a few minutes of opening, since low-mineral water can drift as it sits. Test strips give only a rough reading, which makes small differences between brands hard to see.
What we would buy for this job
- LABSHARK digital pH meter, 0.01 resolution, 3-point calibration: the listing gives plus or minus 0.05 accuracy and includes calibration powder. Calibrate right before you test, and read the water soon after opening. $16.99 when we checked.
As an Amazon Associate, Complete Water Guide earns from qualifying purchases. Prices change, so check the listing.
Frequently asked questions
What is the pH of most bottled water?
Most bottled waters fall between about 6 and 8. In the brands’ own reports, Evian is 7.95, Fiji 7.7, Core 7.4 and Poland Spring 6.2 to 7.5, while alkaline Essentia is 9.8.
What bottled water has the highest pH?
Essentia, among the brands we checked. Its 2021 water quality report shows pH 9.8, and the brand markets 9.5 or higher.
What is the pH of Dasani water?
Dasani’s 2024 annual analysis does not list pH. It is purified water with minerals added for taste, and low-mineral purified waters can read slightly acidic.
What is the pH of Aquafina?
Aquafina’s current report was not accessible to us. An independent June 2020 test by Dr. Jamie Koufman read 5.9, slightly acidic.
Is acidic bottled water bad for you?
Not for safety. The EPA’s 6.5 to 8.5 pH range is a non-enforceable guideline for taste and corrosion. Very acidic drinks such as sparkling water are worth limiting if you are concerned about tooth enamel.
What pH should drinking water be?
The EPA’s secondary standard is 6.5 to 8.5. Outside that range water can taste metallic or bitter at the low end and slippery or soda-like at the high end.
Sources
- Essentia Water Quality Report 2021 (pH 9.8; “9.5 or higher”).
- Evian Natural Spring Water Annual Water Quality Report 2025, NSF test report dated February 20, 2025 (pH 7.95, alkalinity 290 mg/L, TDS 340 mg/L).
- Fiji Water website (7.7 pH) and FIJI Water Still quality report, 2018 copy (pH 7.8; standard 6.5 to 8.5).
- Core Hydration water quality report (pH 7.4; specification 7.2 to 7.6).
- Poland Spring 2025 Water Analysis Report (spring sources 6.2 to 7.5; sparkling 4.4).
- Dasani Purified Water Annual Analysis 2024 and Smartwater Vapor Distilled Annual Analysis 2025, The Coca-Cola Company (no pH listed; smartwater process description).
- Dr. Jamie Koufman, pH of popular bottled water brands, tested June 2020.
- U.S. EPA, Secondary Drinking Water Standards: Guidance for Nuisance Chemicals (pH 6.5 to 8.5, not federally enforceable).
- Amazon listing and price checked November 15, 2026.